gemellocattivo.com http://gemellocattivo.com/forum/ |
|
Casting Marks Engine Parts http://gemellocattivo.com/forum/viewtopic.php?f=12&t=21 |
Page 2 of 7 |
Author: | Brian.G [ Fri Jan 09, 2015 8:32 pm ] |
Post subject: | Re: Casting Marks Engine Parts |
I forgot about the sticky out cam. Brian, |
Author: | mycarsux [ Mon Jan 12, 2015 10:50 pm ] |
Post subject: | Re: Casting Marks Engine Parts |
I hope to see this thread grow with lots of pictures. A few years ago I read through your huge thread on casting/fabrication on vwvortex, and was sad to see it die. It's great to see you lending your talent to this project! |
Author: | mk e [ Tue Jan 13, 2015 9:23 am ] |
Post subject: | Re: Casting Marks Engine Parts |
I dropped the gaskets, pics and sketches off with a good at CAD stuff buddy....I should have models today or tomorrow. |
Author: | Brian.G [ Tue Jan 13, 2015 12:19 pm ] |
Post subject: | Re: Casting Marks Engine Parts |
@Mycar, I cant believe you read it all! Uploading pictures became too annoying when photobucket changed plus I started traveling a lot with work so something had to give. @ Mark, cool. Brian, |
Author: | mk e [ Fri Jan 16, 2015 2:38 pm ] |
Post subject: | Re: Casting Marks Engine Parts |
We've been having a little trouble with the digitize that was suppose to make this fast and easy Trying 1 more thing then I'll just do it manually which at this point would have been faster and easier |
Author: | Brian.G [ Fri Jan 16, 2015 10:27 pm ] |
Post subject: | Re: Casting Marks Engine Parts |
mk e wrote: We've been having a little trouble with the digitize that was suppose to make this fast and easy Trying 1 more thing then I'll just do it manually which at this point would have been faster and easier No worries. Ill say nothing Brian, |
Author: | mk e [ Mon Jan 19, 2015 12:06 pm ] |
Post subject: | Re: Casting Marks Engine Parts |
We got the shapes into solidworks Friday with Mr. Yaeger's help and the part design is rolling nicely....just trying to get everything looking nice now cosmetically with the radius/fillet sizes and such. Another day or so to finish up the models I guess. |
Author: | Brian.G [ Mon Jan 19, 2015 8:25 pm ] |
Post subject: | Re: Casting Marks Engine Parts |
mk e wrote: We got the shapes into solidworks Friday with Mr. Yaeger's help and the part design is rolling nicely....just trying to get everything looking nice now cosmetically with the radius/fillet sizes and such. Another day or so to finish up the models I guess. Cool, |
Author: | mk e [ Tue Jan 20, 2015 6:41 pm ] | |||||
Post subject: | Re: Casting Marks Engine Parts | |||||
Designs done
|
Author: | Brian.G [ Tue Jan 20, 2015 9:04 pm ] |
Post subject: | Re: Casting Marks Engine Parts |
Got files - so you want two of the cam socket ones and one of each of the others? All looks fine to me to get moving, Brian, (edited 3 times to make it sound right, god damn) |
Page 2 of 7 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |