gemellocattivo.com

Which means "Evil Twin". Lets see your projects where you change boring into fun or create the fun from scratch.
It is currently Thu Mar 28, 2024 3:48 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2200 posts ]  Go to page Previous  1 ... 9, 10, 11, 12, 13, 14, 15 ... 220  Next
Author Message
PostPosted: Wed Jul 31, 2019 2:17 pm 
Offline

Joined: Sat Jan 03, 2015 10:13 pm
Posts: 794
You can have the chamber welded up and CNC'd by then.


Top
 Profile Send private message  
 
PostPosted: Wed Jul 31, 2019 2:20 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
TheDarkSideOfWill wrote:
You can have the chamber welded up and CNC'd by then.


maybe....I still need to finish the block tear down too and see if there are any other problems hiding.


Top
 Profile Send private message  
 
PostPosted: Wed Jul 31, 2019 2:24 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
I also need to figure out how to leak test the cam galley to intake port welds...I suspect there are issues similar to the coolant leaking issues I had....a few ports are oily. A couple cylinders honestly don't look like they were ever running, the dyno will be helpful hunting stuff like that.

I just have lights above the house garage doors left on the list, so my plan is to begin a push on the ferrari. get this frikin engine fixed and debugged and tuned over the winter and drive in the spring.


Top
 Profile Send private message  
 
PostPosted: Wed Jul 31, 2019 4:54 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
head gaskets ordered...$200


Top
 Profile Send private message  
 
PostPosted: Thu Aug 01, 2019 2:43 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah....

Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting.


Top
 Profile Send private message  
 
PostPosted: Thu Aug 01, 2019 3:15 pm 
Offline

Joined: Sat Jan 03, 2015 10:13 pm
Posts: 794
What pistons do you have? Mahle Motorsport?


Top
 Profile Send private message  
 
PostPosted: Thu Aug 01, 2019 3:28 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
TheDarkSideOfWill wrote:
What pistons do you have? Mahle Motorsport?


JE


Top
 Profile Send private message  
 
PostPosted: Thu Aug 01, 2019 3:40 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
mk e wrote:
unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah....

Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting.


$693.97 for 2 pistons, 1 pin, 24 wire locks and a new set of rings (all 12 cyl, figure might as well)

This will need to go past Lana before the order goes out.


Top
 Profile Send private message  
 
PostPosted: Fri Aug 02, 2019 7:43 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
mk e wrote:
mk e wrote:
unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah....

Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting.


$693.97 for 2 pistons, 1 pin, 24 wire locks and a new set of rings (all 12 cyl, figure might as well)

This will need to go past Lana before the order goes out.


So I talked to Lana about ordering the piston.....and Lana explained to me the I have a budget which I spent on the wheels and dyno so until the old wheels are sold or a new budget year begins I'm not allowed to buy anything. :shock:


Top
 Profile Send private message  
 
PostPosted: Sun Aug 04, 2019 8:06 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
mk e wrote:

So I talked to Lana about ordering the piston.....and Lana explained to me the I have a budget which I spent on the wheels and dyno so until the old wheels are sold or a new budget year begins I'm not allowed to buy anything. :shock:


Got a nipple on the wheels this morning....fingers crossed :)


Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2200 posts ]  Go to page Previous  1 ... 9, 10, 11, 12, 13, 14, 15 ... 220  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group