gemellocattivo.com

Which means "Evil Twin". Lets see your projects where you change boring into fun or create the fun from scratch.
It is currently Sat Apr 27, 2024 3:42 pm

Board index » Motor vehicle stuff » Engines

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 7 of 8
  [ 78 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8  Next
  Print view Previous topic | Next topic 
Author Message
MerlinTech
 Post subject: Re: New Type 4 VW build
PostPosted: Mon Jun 05, 2023 6:17 am 
Offline

Joined: Tue Jan 06, 2015 8:09 am
Posts: 420
So I finished the new tin work and have it all painted. I went with wrinkle black for the fan intake. I think it came out nice. It is now home and in the chassis. I need a little more time to get it fired up. I have to find the rotor button too. I need oil and a filter, & fresh 93 octane gas. The old 87 is in the lawn mower now.
I also installed the site glass oil level checker.


Attachments:
File comment: The wrinkle on the fan shroud.
wrinkle.jpg
wrinkle.jpg [ 85.38 KiB | Viewed 3089 times ]
File comment: It is in now.
In.jpg
In.jpg [ 66.11 KiB | Viewed 3089 times ]
File comment: The painted tin work.
New tin 2.jpg
New tin 2.jpg [ 55.94 KiB | Viewed 3089 times ]

_________________
Wade Williams
Master Ferrari Tech
Restoration Tech
Engine Machinist
Fabricator
Racecar Driver
Top
 Profile Send private message  
 
mk e
 Post subject: Re: New Type 4 VW build
PostPosted: Mon Jun 05, 2023 6:30 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4256
So pretty!
Top
 Profile Send private message  
 
islerodreaming
 Post subject: Re: New Type 4 VW build
PostPosted: Tue Jun 06, 2023 3:15 am 
Offline

Joined: Mon Jan 05, 2015 9:16 pm
Posts: 74
Looks really good - can't wait to see pictures of the whole car.
Top
 Profile Send private message  
 
MerlinTech
 Post subject: Re: New Type 4 VW build
PostPosted: Tue Jun 06, 2023 6:18 am 
Offline

Joined: Tue Jan 06, 2015 8:09 am
Posts: 420
This is a picture before the engine rebuild. The car looks the same now. Just a bigger engine.


Attachments:
full.jpg
full.jpg [ 25.17 KiB | Viewed 3085 times ]

_________________
Wade Williams
Master Ferrari Tech
Restoration Tech
Engine Machinist
Fabricator
Racecar Driver
Top
 Profile Send private message  
 
MerlinTech
 Post subject: Re: New Type 4 VW build
PostPosted: Thu Jun 08, 2023 6:05 am 
Offline

Joined: Tue Jan 06, 2015 8:09 am
Posts: 420
Last night oil and filter was installed. Spun it over plug free and had oil pressure. Tested for spark, check. Now I need to paint the repaired header and put it on. One side is on now. I need to go get some 93 octane gas and put that in and fire it up and see what happens.

_________________
Wade Williams
Master Ferrari Tech
Restoration Tech
Engine Machinist
Fabricator
Racecar Driver
Top
 Profile Send private message  
 
mk e
 Post subject: Re: New Type 4 VW build
PostPosted: Thu Jun 08, 2023 7:30 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4256
can't wait!
Top
 Profile Send private message  
 
MerlinTech
 Post subject: Re: New Type 4 VW build
PostPosted: Fri Jun 09, 2023 6:08 am 
Offline

Joined: Tue Jan 06, 2015 8:09 am
Posts: 420
Wednesday night I was able to spin the engine without plugs and get some oil pressure. I had the spark plugs in the wires and tested for spark. Spark was strong. Thursday night I stopped and bought 5 gallons of 93 octane fuel. Poured that in and turned the pump on. Carbs filled and I spun it over and it tried to start. I ran out of rotation with the distributor and had to pull the drive and move it a tooth. It then fired right up. I have good oil pressure and it is very responsive. Very happy so far. I have one pipe plug seeping oil and I need to address that. The throttle cable on the car is sticking, need to pull it out and clean and lube it. I will try and post a link to a video. Over all I am very happy with the results so far. Need to get an alternator. The other one was put on the wife's C10 when it needed one.

_________________
Wade Williams
Master Ferrari Tech
Restoration Tech
Engine Machinist
Fabricator
Racecar Driver
Top
 Profile Send private message  
 
MerlinTech
 Post subject: Re: New Type 4 VW build
PostPosted: Fri Jun 09, 2023 6:13 am 
Offline

Joined: Tue Jan 06, 2015 8:09 am
Posts: 420
Here is a link to a short run video: https://youtu.be/xrP9nOISu3U

_________________
Wade Williams
Master Ferrari Tech
Restoration Tech
Engine Machinist
Fabricator
Racecar Driver
Top
 Profile Send private message  
 
mk e
 Post subject: Re: New Type 4 VW build
PostPosted: Fri Jun 09, 2023 7:04 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4256
Congrats wade! It sounds great
Top
 Profile Send private message  
 
MerlinTech
 Post subject: Re: New Type 4 VW build
PostPosted: Mon Jun 12, 2023 6:15 am 
Offline

Joined: Tue Jan 06, 2015 8:09 am
Posts: 420
Well, I took it for a drive. Found the oil pressure comes down to a reasonable number with temp. It idles and drives really well. If I get on it and it pulls pass 3200, it really starts to growl and then the RPM climbs but there is less forward motion. the clutch is not gonna hold it. I need a Kennedy Stage 1 kit. Now I just need to find $260. Maybe a GoFundMe. Or my beloved followers could just send the money. Oh wait, I don't have that kind of follower. Anyone following what I do is just a s broke and for the same reason. :D :lol: :lol: 8-)

_________________
Wade Williams
Master Ferrari Tech
Restoration Tech
Engine Machinist
Fabricator
Racecar Driver
Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 7 of 8
  [ 78 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8  Next

Board index » Motor vehicle stuff » Engines

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 49 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group