gemellocattivo.com

Which means "Evil Twin". Lets see your projects where you change boring into fun or create the fun from scratch.
It is currently Thu Mar 28, 2024 4:09 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 130 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7, 8, 9 ... 13  Next
Author Message
 Post subject: Re: Welding wheels
PostPosted: Wed Jun 26, 2019 3:17 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
I'm thinking maybe 5mm deep on the bolt pockets is ok looking I think...maybe it could go a little deeper. I need to double check the length needed to engage the front and rear hubs properly to be certain there are off the shelf bolts available.

Also I have enough metal on the forging to add a short center cap boss that doesn't look bad, way shorter than OEM but more than is needed to clear the front bearings since this wheel design basically has a spacer built onto it to get caliper clearance.


Attachments:
8.5x18 hc27 20190626.JPG
8.5x18 hc27 20190626.JPG [ 66.91 KiB | Viewed 7334 times ]
Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Thu Jun 27, 2019 8:06 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
My plan was to do a final measurement check for bolt length and center emblem mounting last night but by the time I got home I completely forgot about it :oops: ....maybe tonight I'll remember so I can get his order rolling and off my to-do list. I think these wheels will be a nice change.


Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Fri Jun 28, 2019 7:23 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
I checked the bolts in hubs and its like 22mm front and 18mm rear so I'll make the pockest like 8mm deep to be sure the 80mm bolts work in front. easy.

I realize I never added valve stem holes....but google says the common sizes are .453" and .625", not sure which to use?

edit - the porsche forum says speedline uses .453 so I guess that's the winner


Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Fri Jun 28, 2019 7:40 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
mk e wrote:
I realize I never added valve stem holes....but google says the common sizes are .453" and .625", not sure which to use?

edit - the porsche forum says speedline uses .453 so I guess that's the winner


hmmmm....In my quest for weight reduction it looks like I kind of eliminated the surface where the 308 wheel mounts the valve stem. :?

I guess it will have to be ok some where else.....


Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Fri Jun 28, 2019 8:19 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
mk e wrote:
mk e wrote:

hmmmm....In my quest for weight reduction it looks like I kind of eliminated the surface where the 308 wheel mounts the valve stem. :?

I guess it will have to be ok some where else.....


This is what I can do....ok I think.


Attachments:
stem 2 Capture.JPG
stem 2 Capture.JPG [ 77.81 KiB | Viewed 7323 times ]
stem 1 Capture.JPG
stem 1 Capture.JPG [ 68.63 KiB | Viewed 7323 times ]
Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Fri Jun 28, 2019 8:51 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
Request for quote sent!

edit - Damn it I never fixed the wheel bolt depth :oops: This is just a quote, rev2 will be for production I guess.....


Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Sat Jun 29, 2019 7:56 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
First question from the wheel peolpe....?can we move the valve stem to here?"
Attachment:
stem suggestion.jpg
stem suggestion.jpg [ 70.73 KiB | Viewed 7322 times ]



The spot they picked was basically the OEM spot whic I really don't think will work without me doing some redesign to widen the landing area. I think OEM is 20+mm and mine is 10mm


Attachments:
wheel stem 2 Capture.JPG
wheel stem 2 Capture.JPG [ 74.25 KiB | Viewed 7322 times ]
wheel stem optionCapture.JPG
wheel stem optionCapture.JPG [ 92.95 KiB | Viewed 7322 times ]
Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Mon Jul 01, 2019 8:00 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
China says 25-30 days delivery. Trying to find out if the quote includes paint or powder coat, they said they can do either but I'm not sure if its quoted. Also trying to find out how hot the powder coat is and if it softens the wheel.....I want powder but don't want bent wheels.

Next comes the challenge of getting the PO approved


Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Mon Jul 01, 2019 6:59 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
I was asked asked if I could do 17x8 and 17x9. I reached out the the manufacture and there are forgings available that will work so the answer is yes. I need to finish up the design and he needs to measure up what offset he wants and double check caliper position....I'll place the order in about 2 weeks so I cam move on to other projects. If anyone else wants in they are $600 each plus $300 shipping from china and tariffs (set of 4), then shipping to you. I'll post the finish design, the request was make it more OEM looking where the spokes meet the rim which I'll do but it will add a pound or 2 so 22.5lbs for the 17x8 right now will, probably change to about 24lbs. The 9" will be a pound or 2 more but I haven't started that design yet so don't hold me to it. A 9" wheel will not fit without aftermarket rear springs the 2.5" or 2.25' ID type.

These "circular display stands" will be not for highway use, no DOT markings, use at your own risk with no promises about anything made or implied.

edit - forgot if you want 18s they are the same price.....the 8.5" will fit, 10in requires the rear lower shock mount be modified or you need flares. I could also do a 9 or 9.5 if someone wants that.


Top
 Profile Send private message  
 
 Post subject: Re: Welding wheels
PostPosted: Tue Jul 02, 2019 10:55 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
I think the 17x8 and 9 are done


Attachments:
17x8 OEM look angle Capture.JPG
17x8 OEM look angle Capture.JPG [ 90.23 KiB | Viewed 7298 times ]
17x8 OEM look front Capture.JPG
17x8 OEM look front Capture.JPG [ 72.33 KiB | Viewed 7298 times ]
17x8 OEM look back Capture.JPG
17x8 OEM look back Capture.JPG [ 86.28 KiB | Viewed 7298 times ]
OEM stem Capture.JPG
OEM stem Capture.JPG [ 91.73 KiB | Viewed 7298 times ]
Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 130 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7, 8, 9 ... 13  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group