gemellocattivo.com

Which means "Evil Twin". Lets see your projects where you change boring into fun or create the fun from scratch.
It is currently Thu Mar 28, 2024 11:55 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 22 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
PostPosted: Wed Oct 11, 2017 7:31 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
Plus you have to start somewhere!

Do you think the board is working?

How are you testing the circuits....bacis fw or are you using a signal generator or something like that?


Top
 Profile Send private message  
 
PostPosted: Wed Oct 11, 2017 1:41 pm 
Offline
User avatar

Joined: Thu Sep 21, 2017 2:53 pm
Posts: 16
Location: Kiev. Ukraine.
First I start the board on the table with the connected input signal simulators. I simulate engine start from 0 to 400 engine revolutions.
Using a digital oscillograph and an 8-channel logic analyzer
I check the output signals of fuel, ignition, ....


Attachments:
49_47pin.jpg
49_47pin.jpg [ 255.76 KiB | Viewed 14116 times ]
IMAG0548.jpg
IMAG0548.jpg [ 1.78 MiB | Viewed 14116 times ]
Top
 Profile Send private message  
 
PostPosted: Wed Oct 11, 2017 2:11 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
I thought maybe you were applying an external signal to test drivers and such.....don't you need fw to "start the board"? To get the etpu to read the crank signal inout yoy show and generate the outputs you show?

The etpu can generate a crank/cam signal for testing too....we use it for o5e work and just jumper it to the inputs .....but it need fw to do anything which iis why I asked what you're using.


Top
 Profile Send private message  
 
PostPosted: Wed Oct 11, 2017 2:13 pm 
Offline
User avatar

Joined: Thu Sep 21, 2017 2:53 pm
Posts: 16
Location: Kiev. Ukraine.
To simulate the signals of crank and cam sensors I'm using now -
ardu-stim
CrankWheelPulser.


Top
 Profile Send private message  
 
PostPosted: Wed Oct 11, 2017 2:40 pm 
Offline
User avatar

Joined: Thu Sep 21, 2017 2:53 pm
Posts: 16
Location: Kiev. Ukraine.
I have a large archive of sensor waveforms, and it is constantly replenished.
I necessarily compare them with those that are on the Internet and often they are different.
For example, I studied the documentation for the Mercedes M113 engine and found the difference in the signals of the camshaft sensor.


Attachments:
IMG_20170425_111312-smol.jpg
IMG_20170425_111312-smol.jpg [ 151.92 KiB | Viewed 14115 times ]
2013-04-23_042148_121212_zpsjpcbihmz.jpg
2013-04-23_042148_121212_zpsjpcbihmz.jpg [ 56.86 KiB | Viewed 14115 times ]
Top
 Profile Send private message  
 
PostPosted: Sun Jun 05, 2022 3:15 pm 
Offline
User avatar

Joined: Thu Sep 21, 2017 2:53 pm
Posts: 16
Location: Kiev. Ukraine.
Good afternoon. The board I designed on MPC5634M80 is tested with some o5e firmware.
The board is working. The firmware is working. Still need to test.


Attachments:
WP_20220605_21_18_09_Pro.jpg
WP_20220605_21_18_09_Pro.jpg [ 297.31 KiB | Viewed 4821 times ]
Top
 Profile Send private message  
 
PostPosted: Sun Jun 05, 2022 7:02 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
slavaelektro wrote:
Good afternoon. The board I designed on MPC5634M80 is tested with some o5e firmware.
The board is working. The firmware is working. Still need to test.


No way!?!?!

Congrats!


Top
 Profile Send private message  
 
PostPosted: Tue Jun 07, 2022 12:42 pm 
Offline
User avatar

Joined: Thu Sep 21, 2017 2:53 pm
Posts: 16
Location: Kiev. Ukraine.
Good afternoon. Of the half of the tested firmware, the working one is o5e_firmware-master2


Attachments:
WP_20220607_1.jpg
WP_20220607_1.jpg [ 232.34 KiB | Viewed 4802 times ]
Top
 Profile Send private message  
 
PostPosted: Tue Jun 07, 2022 3:54 pm 
Offline
User avatar

Joined: Thu Sep 21, 2017 2:53 pm
Posts: 16
Location: Kiev. Ukraine.
I have developed a driver that opens petrol injectors with fuel pressure
up to 12 bar just as easily and quickly as at the usual pressure of 3 bar.
Now it will be possible with minimal settings to turbocharge almost any
naturally aspirated engine to increase power up to +50%.
The first prototype was successfully tested in 2014.
Now I'm working on the fuel pressure control system and turbines.


Attachments:
Dinamic-injection-pressure-control.gif
Dinamic-injection-pressure-control.gif [ 278.51 KiB | Viewed 4798 times ]
Top
 Profile Send private message  
 
PostPosted: Tue Jun 07, 2022 4:34 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 4251
How do you get the fuel system to 12bar? that is way above what it's designed for, I think my pump deadheads at around 6 bar

Did I ever point you toward Jon who wrote most of the working fw?
jon@zeeff.com

I did the engine control logic parts which is very little and honestly I would change if (and did for the frankenferrari's ECU), Jon did all the heavy lifting of getting the everything working. We had a bit of a falling out on the project but he for sure knows WAY more than me about the FW

Off topic, I see you're location in Kiev, you doing OK? My wife Lana (Svitlana) is Ukrainian so we are pulling you you guys and donate when we can! Glory to Ukraine!


Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group