Well done!
So you have the crank/cam simulator pins jumpered to the the crank/cam input pins or have some other crank/cam simulated input? You won't get fuel or spark without a good rpm sync.
Then, and I'm reach back into the memory vault there are a couple other things that can disable fuel. For 1 there is a fuel enable setting, make sure that is a 1. then there is a rev limiter fuel cut.....make sure the rev limiter is disabled or the rpm set very high.
We never actually ran an engine. mine wasn't ready and the people with engine didn't have the skills, the people with the skills didn't have engines....so it waited....then I discovered enginelab and moved on, its everything I ever hoped o5e could be
. That said everything in o5e has been bench tested and should work....I think the logic I created for my enginelab setup is better than what what I did for o5e, but it should work.
Another place you might be interested in looking is rusEFI, they have many engines running and quite a few features working....there is a question in my mind about the accuracy and robustness of the fuel/spark outputs but they have many engines running so I might be paranoid.