gemellocattivo.com

Which means "Evil Twin". Lets see your projects where you change boring into fun or create the fun from scratch.
It is currently Wed Sep 23, 2020 3:02 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 41 posts ]  Go to page 1, 2, 3, 4, 5  Next
Author Message
 Post subject: 308 supercharger build.
PostPosted: Sun Jan 18, 2015 2:17 am 
Offline
User avatar

Joined: Sat Jan 03, 2015 4:02 am
Posts: 56
Location: Vicenza, Italy
This is one of Mark's superchargers.

Wade, 308nut, has pulled the engine to make the SC fitment easier and good thing too as he discovered a strange A/C braket, a bad patch to a header crack, and the foam insulation had disintegrated. Swiss cars had foam, he will replace this with the stainless panel that the rest of the 308s had. Also I'm buying the Nouvalari exhaust that was used on the fully restored 308 he recently sold, the owner wanted it off to sell separately.


A reminder about the rest of the build:
New suspension bushings, powder coated arms, faster ratio rack, rebuilt shocks, Superformance (because Addco sucks) larger anti-roll bars, and Girodisk front brake kit.
Fix shift shaft oil leak.
New speakers.
Modern FI and ignition run off an Electromotive ECU.
Ferraripilot radiator.
Seats had new leather and now the console and doors do, plus new glass for clock.
Front air dam painted to fix chips, and Wade is going to make a custom front plate bracket that won't block air to the radiators.
Windows fixed and new speakers.
All hoses replaced, except for recent fuel hoses that were replaced by the good ones.


Attachments:
IMG_2738.JPG
IMG_2738.JPG [ 122.47 KiB | Viewed 16012 times ]

_________________
Todd
Top
 Profile Send private message  
 
PostPosted: Sun Jan 18, 2015 2:18 am 
Offline
User avatar

Joined: Sat Jan 03, 2015 4:02 am
Posts: 56
Location: Vicenza, Italy
Another picture.


Attachments:
IMG_2737.JPG
IMG_2737.JPG [ 106.57 KiB | Viewed 16014 times ]

_________________
Todd
Top
 Profile Send private message  
 
PostPosted: Sun Jan 18, 2015 2:22 am 
Offline

Joined: Fri Jan 02, 2015 6:42 pm
Posts: 109
Is this a modified and canibalised SC to fit a 308?

Sure looks like an interesting project.......more pics please.


Top
 Profile Send private message  
 
PostPosted: Sun Jan 18, 2015 2:45 am 
Offline
User avatar

Joined: Sat Jan 03, 2015 4:02 am
Posts: 56
Location: Vicenza, Italy
a1exander wrote:
Is this a modified and canibalised SC to fit a 308?

Sure looks like an interesting project.......more pics please.

No, 100% custom by Mark. Here is what his looked like.


Attachments:
Marks finished 1.jpg
Marks finished 1.jpg [ 40.81 KiB | Viewed 16014 times ]

_________________
Todd
Top
 Profile Send private message  
 
PostPosted: Sun Jan 18, 2015 8:33 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 3108
That setup is capable of 600+ hp.....you're going to like it I think :)

here's an old f-chat thread I did during the build with some more pics
http://www.ferrarichat.com/discus/messa ... 15437.html

I build the 2 at the same time but the guy I built it for wanted to do whatever he could himself, but then decided to sell it so its not actually finished and trying to install it is giving Wade some issues.....to get that whole thing stuffed under a stock 308 hood there clearances everywhere are only like 1mm....after you grind of everythign you can :o


Top
 Profile Send private message  
 
PostPosted: Sun Jan 18, 2015 3:51 pm 
Offline
User avatar

Joined: Sat Jan 03, 2015 4:02 am
Posts: 56
Location: Vicenza, Italy
More on the total build by Wade, 308nut.


Attachments:
File comment: The new exhaust
exhaust.jpg
exhaust.jpg [ 161.76 KiB | Viewed 15999 times ]
File comment: The brakes
DSC07327.JPG
DSC07327.JPG [ 198.07 KiB | Viewed 15999 times ]
File comment: The suspension rebuild
DSC07208.JPG
DSC07208.JPG [ 201.79 KiB | Viewed 15999 times ]

_________________
Todd
Top
 Profile Send private message  
 
PostPosted: Sun Jan 18, 2015 5:16 pm 
Offline
User avatar

Joined: Fri Jan 02, 2015 1:12 pm
Posts: 172
Todd308TR wrote:
Another picture.



Is this going to fit under the rear bonnet?

Marks picture shows more of a low rider. This picture that Wade posted looks way taller.

What gives?


Top
 Profile Send private message  
 
PostPosted: Mon Jan 19, 2015 12:10 am 
Offline
User avatar

Joined: Sat Jan 03, 2015 4:02 am
Posts: 56
Location: Vicenza, Italy
Pizzaman wrote:
Todd308TR wrote:
Another picture.



Is this going to fit under the rear bonnet?

Marks picture shows more of a low rider. This picture that Wade posted looks way taller.

What gives?


It's just perspective, look how tight the fit is.

_________________
Todd


Top
 Profile Send private message  
 
PostPosted: Mon Jan 19, 2015 9:53 am 
Offline
User avatar

Joined: Fri Jan 02, 2015 1:12 pm
Posts: 172
Todd308TR wrote:

It's just perspective, look how tight the fit is.



Yeah, I guess that's what she said but getting back to the motor, it looks mean man!


Top
 Profile Send private message  
 
PostPosted: Tue Jan 20, 2015 2:00 pm 
Offline
User avatar

Joined: Sat Jan 03, 2015 4:02 am
Posts: 56
Location: Vicenza, Italy
Pizzaman wrote:
Todd308TR wrote:

It's just perspective, look how tight the fit is.



Yeah, I guess that's what she said but getting back to the motor, it looks mean man!

Actually she said, "ouch." LOL

_________________
Todd


Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 41 posts ]  Go to page 1, 2, 3, 4, 5  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group